🚚 Free Worldwide Shipping on All Orders!Shop Now
Formlabs Form Wash (2nd Generation)
HomeStore

Formlabs Form Wash (2nd Generation)

Formlabs Form Wash (2nd Generation)

Form Wash automatically cleans printed parts thoroughly and efficiently with IPA or alternative solvents. Keep parts directly on the Build Platform as you transition them from the printer to Form Wash, or remove parts and place them in the wash basket. Parts are precisely and thoroughly agitated in solvent with an impeller, getting every nook and cranny perfectly clean, automatically for the appropriate time. When washing completes, the Form Wash automatically raises parts out of the IPA so they can air dry.

 

Automate Cleaning With Form Wash
Adaptable to Build Platforms Seamlessly switch between build platforms with adjustable platform mounts, configurable at various heights and widths.
Improved Agitation Let Form Wash auto-clean your parts for the appropriate time thoroughly with 3x more agitation than the previous generation.
Compatible with Variety of Solvents Our recommendation is using IPA for the best cleaning performance, but alternative solvents such as TPM are also compatible with Form Wash.
Flexible Solvent Volume Tailor the solvent volume to the size and quantity of your parts. Use lower solvent quantities for smaller parts and builds to increase resource efficiency.

Set It and Forget It

Simply set the appropriate time and let Form Wash get to work.

10 Minutes

Default wash time when using fresh isopropyl alcohol (IPA).

7 - 15 Liters

Flexible solvent volumes to wash parts of all sizes.

120 Prints

Number of prints per IPA refill with regular use. Wash 67% more parts before replacing solvent compared to the previous generation.

 Form Wash

Form Wash components

  1. Elevator: A flat plate with mounting points for the basket and build platform mount arms. Raises and lowers to wash and automatically dry printed parts.
  2. Build platform mount arms: Adjustable arms hold the build platform when washing parts on the platform.
  3. Basket: Removable container holds parts to wash without the build platform. A single hook secures the basket to the elevator to raise and lower.
  4. Impeller: Couples to the Form Wash using magnets and agitates the solvent during the wash cycle.
  5. Display: Shows status, time, and options for configuring the Form Wash.
  6. Knob: Turn or press to adjust time and to start, pause, or end a wash cycle.
  7. Outer lid: Limits solvent evaporation. Keep the lid closed when not in use.
  8. Inner lid: A hinged, secondary lid opens and closes to contain solvent while allowing parts to be lowered or raised from the bucket.
  9. Wash bucket: Removable container holds a maximum of 16.22 L of solvent. A rotating impeller at the bottom circulates the solvent.
  10. Hydrometer: If using isopropyl alcohol (IPA) as a solvent (or another solvent with an equivalent specific gravity), float in IPA to measure the IPA's resin concentration (based on previous calibration in fresh IPA). Other solvents may require a different hydrometer for a different specific gravity range.
  11. Power supply: Provides power to the Form Wash. Specifications: 24 V, 2 A.
 Form Wash components

Technical Specifications

Printer Compatibility Form 4, Form 4B, Form 3/+, Form 3B/+, Form 2
Dimensions 31.5 x 29.3 x 40.5 cm
Height when open: 71.4 cm
Weight 8.6 kg (without solvent)
Bucket Volume 14.4 L
Maximum Part Size 20 x 14.5 x 19.5 cm
Suggested Operating Environment Suggested 18—28 °C
Agitation Method Magnetically coupled impeller
Included Accessories
  • Wash Bucket
  • Wash Basket
  • Hydrometer
  • 2x Platforms Mounts
Power Requirements
  • 90–240 V
  • 2.0 A 50/60 Hz
  • 50W
Compatible Solvents
  • Formlabs Resin Washing Solution
  • IPA
  • TPM
  • Water

Disclaimer: The content on this page or contained in the links has been obtained from Formlabs, Imaginables has not verified the content and does not warrant or make any representation as to the content's accuracy. Customers should satisfy themselves as to the suitability of the product and their use, as well as the compliance with all applicable laws and regulations.

$291.11

Original: $970.36

-70%
Formlabs Form Wash (2nd Generation)—

$970.36

$291.11

Formlabs Form Wash (2nd Generation)

Form Wash automatically cleans printed parts thoroughly and efficiently with IPA or alternative solvents. Keep parts directly on the Build Platform as you transition them from the printer to Form Wash, or remove parts and place them in the wash basket. Parts are precisely and thoroughly agitated in solvent with an impeller, getting every nook and cranny perfectly clean, automatically for the appropriate time. When washing completes, the Form Wash automatically raises parts out of the IPA so they can air dry.

 

Automate Cleaning With Form Wash
Adaptable to Build Platforms Seamlessly switch between build platforms with adjustable platform mounts, configurable at various heights and widths.
Improved Agitation Let Form Wash auto-clean your parts for the appropriate time thoroughly with 3x more agitation than the previous generation.
Compatible with Variety of Solvents Our recommendation is using IPA for the best cleaning performance, but alternative solvents such as TPM are also compatible with Form Wash.
Flexible Solvent Volume Tailor the solvent volume to the size and quantity of your parts. Use lower solvent quantities for smaller parts and builds to increase resource efficiency.

Set It and Forget It

Simply set the appropriate time and let Form Wash get to work.

10 Minutes

Default wash time when using fresh isopropyl alcohol (IPA).

7 - 15 Liters

Flexible solvent volumes to wash parts of all sizes.

120 Prints

Number of prints per IPA refill with regular use. Wash 67% more parts before replacing solvent compared to the previous generation.

 Form Wash

Form Wash components

  1. Elevator: A flat plate with mounting points for the basket and build platform mount arms. Raises and lowers to wash and automatically dry printed parts.
  2. Build platform mount arms: Adjustable arms hold the build platform when washing parts on the platform.
  3. Basket: Removable container holds parts to wash without the build platform. A single hook secures the basket to the elevator to raise and lower.
  4. Impeller: Couples to the Form Wash using magnets and agitates the solvent during the wash cycle.
  5. Display: Shows status, time, and options for configuring the Form Wash.
  6. Knob: Turn or press to adjust time and to start, pause, or end a wash cycle.
  7. Outer lid: Limits solvent evaporation. Keep the lid closed when not in use.
  8. Inner lid: A hinged, secondary lid opens and closes to contain solvent while allowing parts to be lowered or raised from the bucket.
  9. Wash bucket: Removable container holds a maximum of 16.22 L of solvent. A rotating impeller at the bottom circulates the solvent.
  10. Hydrometer: If using isopropyl alcohol (IPA) as a solvent (or another solvent with an equivalent specific gravity), float in IPA to measure the IPA's resin concentration (based on previous calibration in fresh IPA). Other solvents may require a different hydrometer for a different specific gravity range.
  11. Power supply: Provides power to the Form Wash. Specifications: 24 V, 2 A.
 Form Wash components

Technical Specifications

Printer Compatibility Form 4, Form 4B, Form 3/+, Form 3B/+, Form 2
Dimensions 31.5 x 29.3 x 40.5 cm
Height when open: 71.4 cm
Weight 8.6 kg (without solvent)
Bucket Volume 14.4 L
Maximum Part Size 20 x 14.5 x 19.5 cm
Suggested Operating Environment Suggested 18—28 °C
Agitation Method Magnetically coupled impeller
Included Accessories
  • Wash Bucket
  • Wash Basket
  • Hydrometer
  • 2x Platforms Mounts
Power Requirements
  • 90–240 V
  • 2.0 A 50/60 Hz
  • 50W
Compatible Solvents
  • Formlabs Resin Washing Solution
  • IPA
  • TPM
  • Water

Disclaimer: The content on this page or contained in the links has been obtained from Formlabs, Imaginables has not verified the content and does not warrant or make any representation as to the content's accuracy. Customers should satisfy themselves as to the suitability of the product and their use, as well as the compliance with all applicable laws and regulations.

Product Information

Shipping & Returns

Description

Form Wash automatically cleans printed parts thoroughly and efficiently with IPA or alternative solvents. Keep parts directly on the Build Platform as you transition them from the printer to Form Wash, or remove parts and place them in the wash basket. Parts are precisely and thoroughly agitated in solvent with an impeller, getting every nook and cranny perfectly clean, automatically for the appropriate time. When washing completes, the Form Wash automatically raises parts out of the IPA so they can air dry.

 

Automate Cleaning With Form Wash
Adaptable to Build Platforms Seamlessly switch between build platforms with adjustable platform mounts, configurable at various heights and widths.
Improved Agitation Let Form Wash auto-clean your parts for the appropriate time thoroughly with 3x more agitation than the previous generation.
Compatible with Variety of Solvents Our recommendation is using IPA for the best cleaning performance, but alternative solvents such as TPM are also compatible with Form Wash.
Flexible Solvent Volume Tailor the solvent volume to the size and quantity of your parts. Use lower solvent quantities for smaller parts and builds to increase resource efficiency.

Set It and Forget It

Simply set the appropriate time and let Form Wash get to work.

10 Minutes

Default wash time when using fresh isopropyl alcohol (IPA).

7 - 15 Liters

Flexible solvent volumes to wash parts of all sizes.

120 Prints

Number of prints per IPA refill with regular use. Wash 67% more parts before replacing solvent compared to the previous generation.

 Form Wash

Form Wash components

  1. Elevator: A flat plate with mounting points for the basket and build platform mount arms. Raises and lowers to wash and automatically dry printed parts.
  2. Build platform mount arms: Adjustable arms hold the build platform when washing parts on the platform.
  3. Basket: Removable container holds parts to wash without the build platform. A single hook secures the basket to the elevator to raise and lower.
  4. Impeller: Couples to the Form Wash using magnets and agitates the solvent during the wash cycle.
  5. Display: Shows status, time, and options for configuring the Form Wash.
  6. Knob: Turn or press to adjust time and to start, pause, or end a wash cycle.
  7. Outer lid: Limits solvent evaporation. Keep the lid closed when not in use.
  8. Inner lid: A hinged, secondary lid opens and closes to contain solvent while allowing parts to be lowered or raised from the bucket.
  9. Wash bucket: Removable container holds a maximum of 16.22 L of solvent. A rotating impeller at the bottom circulates the solvent.
  10. Hydrometer: If using isopropyl alcohol (IPA) as a solvent (or another solvent with an equivalent specific gravity), float in IPA to measure the IPA's resin concentration (based on previous calibration in fresh IPA). Other solvents may require a different hydrometer for a different specific gravity range.
  11. Power supply: Provides power to the Form Wash. Specifications: 24 V, 2 A.
 Form Wash components

Technical Specifications

Printer Compatibility Form 4, Form 4B, Form 3/+, Form 3B/+, Form 2
Dimensions 31.5 x 29.3 x 40.5 cm
Height when open: 71.4 cm
Weight 8.6 kg (without solvent)
Bucket Volume 14.4 L
Maximum Part Size 20 x 14.5 x 19.5 cm
Suggested Operating Environment Suggested 18—28 °C
Agitation Method Magnetically coupled impeller
Included Accessories
  • Wash Bucket
  • Wash Basket
  • Hydrometer
  • 2x Platforms Mounts
Power Requirements
  • 90–240 V
  • 2.0 A 50/60 Hz
  • 50W
Compatible Solvents
  • Formlabs Resin Washing Solution
  • IPA
  • TPM
  • Water

Disclaimer: The content on this page or contained in the links has been obtained from Formlabs, Imaginables has not verified the content and does not warrant or make any representation as to the content's accuracy. Customers should satisfy themselves as to the suitability of the product and their use, as well as the compliance with all applicable laws and regulations.