Bambu Lab Induction Hotend for H2C
Bambu Lab Induction Hotend with Hardened Steel Nozzle is specially designed for H2C Vortek System. Each Vortek Hotend stores its filament information locally, ensuring correct material mapping and preventing loading errors. When printing with more than seven filament types, the system intelligently optimizes hotend mapping to minimize purge waste and improve overall efficiency.
The Vortek Induction Hotend rapidly heats the nozzle to printing temperature in approximately 8 seconds (PLA). This fast response shortens color-change transitions and further reduces purge waste. Integrated overheat, overvoltage, short-circuit, and open-circuit protection ensure reliable performance during continuous multi-material workflows.
Real High-Flow, Real Time Saved
| H2C Max Volumetric Speed | |
| Induction Stainless Steel Nozzle (0.2mm) | 2 mm³/s |
| Induction Hardened Steel Nozzle (0.4mm) | 25 mm³/s |
| Induction Hardened Steel Nozzle (0.6mm) | 30 mm³/s |
| Induction Hardened Steel Nozzle (0.8mm) | 30 mm³/s |
| High Flow Induction Hardened Steel Nozzle (0.4mm) | 40 mm³/s |
| High Flow Induction Hardened Steel Nozzle (0.6mm) | 40 mm³/s |
| High Flow Induction Hardened Steel Nozzle (0.8mm) | 40 mm³/s |
*Tested with Bambu PLA Basic.
Filament Compatibility
| Filament | Induction 0.2 mm Stainless Steel |
Induction 0.4 mm Hardened Steel |
Induction 0.6 mm Hardened Steel |
Induction 0.8 mm Hardened Steel |
Induction 0.4 mm High Flow Hardened Steel |
Induction 0.6 mm High Flow Hardened Steel |
Induction 0.8 mm High Flow Hardened Steel |
| PLA Basic | √ | √ | √ | √ | √ | √ | √ |
| PLA Matte | √ | √ | √ | √ | √ | √ | √ |
| PLA Lite | √ | √ | √ | √ | √ | √ | √ |
| PLA Basic Gradient | √ | √ | √ | √ | √ | √ | √ |
| PLA Silk+ | √ | √ | Not recommended | Not recommended | √ | Not recommended | Not recommended |
| PLA Silk Dual Color | √ | √ | Not recommended | Not recommended | √ | Not recommended | Not recommended |
| PLA Silk | √ | √ | Not recommended | Not recommended | √ | Not recommended | Not recommended |
| PLA Metal | √ | √ | √ | √ | √ | √ | √ |
| PLA Marble | X | √ | √ | √ | √ | √ | √ |
| PLA Sparkle | X | √ | √ | √ | √ | √ | √ |
| PLA Wood | X | √ | √ | √ | √ | √ | √ |
| PLA Galaxy | Not recommended | √ | √ | √ | √ | √ | √ |
| PLA Glow | X | √ | √ | √ | √ | √ | √ |
| PLA Translucent | Not recommended | √ | √ | √ | √ | √ | √ |
| PLA tough+ | √ | √ | √ | √ | √ | √ | √ |
| PLA-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PLA Aero | X | √ | Not recommended | Not recommended | √ | Not recommended | Not recommended |
| PETG HF | √ | √ | √ | √ | √ | √ | √ |
| PETG Basic | √ | √ | √ | √ | √ | √ | √ |
| PETG Translucent | Not recommended | √ | √ | √ | √ | √ | √ |
| PETG-CF | X | √ | √ | √ | Not recommended | √ | √ |
| ABS | √ | √ | √ | √ | √ | √ | √ |
| ABS-GF | X | √ | √ | √ | √ | √ | √ |
| ASA | √ | √ | √ | √ | √ | √ | √ |
| ASA Aero | X | √ | Not recommended | Not recommended | √ | Not recommended | Not recommended |
| ASA-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PC | √ | √ | √ | √ | √ | √ | √ |
| PC FR | √ | √ | √ | √ | √ | √ | √ |
| TPU for AMS | X | √ | √ | √ | √ | √ | √ |
| TPU 95A HF | X | √ | √ | √ | √ | √ | √ |
| TPU 85A | X | X | X | X | X | X | X |
| TPU 90A | X | √ | √ | √ | Not recommended | Not recommended | Not recommended |
| PAHT-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PET-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PA6-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PA6-GF | X | √ | √ | √ | Not recommended | √ | √ |
| PPA-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PPS-CF | X | √ | √ | √ | Not recommended | √ | √ |
| Support for ABS | X | √ | √ | √ | √ | √ | √ |
| Support for PLA/PETG | √ | √ | √ | √ | √ | √ | √ |
| Support for PA/PET | X | √ | √ | √ | √ | √ | √ |
| Support for PLA (New Version) | √ | √ | √ | √ | √ | √ | √ |
| PVA | X | √ | √ | √ | √ | √ | √ |
1. If you print only single-color filament, we recommend using the Fixed Hotend (Induction Hotend) for printing.
2. If you need multi-color printing with the AMS, connect the AMS to the right-side Fixed Hotend.
3. If you want to use the second hotend for support-material printing, we recommend using the Liftable Hotend.
4. TPU85A is only supported on the right-side Fixed Hotend. TPU95AHF/90A is expected to be supported on the left-side Liftable Hotend starting from firmware version U2.
5. PET-CF / PPA-CF / PPS-CF are supported only on the left-side Liftable Hotend.
6. CF/GF-reinforced filaments are not compatible with stainless steel nozzles.
Compatibility
H2C and H2C Laser
Original: $41.89
-70%$41.89
$12.57More Images
Bambu Lab Induction Hotend for H2C
Bambu Lab Induction Hotend with Hardened Steel Nozzle is specially designed for H2C Vortek System. Each Vortek Hotend stores its filament information locally, ensuring correct material mapping and preventing loading errors. When printing with more than seven filament types, the system intelligently optimizes hotend mapping to minimize purge waste and improve overall efficiency.
The Vortek Induction Hotend rapidly heats the nozzle to printing temperature in approximately 8 seconds (PLA). This fast response shortens color-change transitions and further reduces purge waste. Integrated overheat, overvoltage, short-circuit, and open-circuit protection ensure reliable performance during continuous multi-material workflows.
Real High-Flow, Real Time Saved
| H2C Max Volumetric Speed | |
| Induction Stainless Steel Nozzle (0.2mm) | 2 mm³/s |
| Induction Hardened Steel Nozzle (0.4mm) | 25 mm³/s |
| Induction Hardened Steel Nozzle (0.6mm) | 30 mm³/s |
| Induction Hardened Steel Nozzle (0.8mm) | 30 mm³/s |
| High Flow Induction Hardened Steel Nozzle (0.4mm) | 40 mm³/s |
| High Flow Induction Hardened Steel Nozzle (0.6mm) | 40 mm³/s |
| High Flow Induction Hardened Steel Nozzle (0.8mm) | 40 mm³/s |
*Tested with Bambu PLA Basic.
Filament Compatibility
| Filament | Induction 0.2 mm Stainless Steel |
Induction 0.4 mm Hardened Steel |
Induction 0.6 mm Hardened Steel |
Induction 0.8 mm Hardened Steel |
Induction 0.4 mm High Flow Hardened Steel |
Induction 0.6 mm High Flow Hardened Steel |
Induction 0.8 mm High Flow Hardened Steel |
| PLA Basic | √ | √ | √ | √ | √ | √ | √ |
| PLA Matte | √ | √ | √ | √ | √ | √ | √ |
| PLA Lite | √ | √ | √ | √ | √ | √ | √ |
| PLA Basic Gradient | √ | √ | √ | √ | √ | √ | √ |
| PLA Silk+ | √ | √ | Not recommended | Not recommended | √ | Not recommended | Not recommended |
| PLA Silk Dual Color | √ | √ | Not recommended | Not recommended | √ | Not recommended | Not recommended |
| PLA Silk | √ | √ | Not recommended | Not recommended | √ | Not recommended | Not recommended |
| PLA Metal | √ | √ | √ | √ | √ | √ | √ |
| PLA Marble | X | √ | √ | √ | √ | √ | √ |
| PLA Sparkle | X | √ | √ | √ | √ | √ | √ |
| PLA Wood | X | √ | √ | √ | √ | √ | √ |
| PLA Galaxy | Not recommended | √ | √ | √ | √ | √ | √ |
| PLA Glow | X | √ | √ | √ | √ | √ | √ |
| PLA Translucent | Not recommended | √ | √ | √ | √ | √ | √ |
| PLA tough+ | √ | √ | √ | √ | √ | √ | √ |
| PLA-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PLA Aero | X | √ | Not recommended | Not recommended | √ | Not recommended | Not recommended |
| PETG HF | √ | √ | √ | √ | √ | √ | √ |
| PETG Basic | √ | √ | √ | √ | √ | √ | √ |
| PETG Translucent | Not recommended | √ | √ | √ | √ | √ | √ |
| PETG-CF | X | √ | √ | √ | Not recommended | √ | √ |
| ABS | √ | √ | √ | √ | √ | √ | √ |
| ABS-GF | X | √ | √ | √ | √ | √ | √ |
| ASA | √ | √ | √ | √ | √ | √ | √ |
| ASA Aero | X | √ | Not recommended | Not recommended | √ | Not recommended | Not recommended |
| ASA-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PC | √ | √ | √ | √ | √ | √ | √ |
| PC FR | √ | √ | √ | √ | √ | √ | √ |
| TPU for AMS | X | √ | √ | √ | √ | √ | √ |
| TPU 95A HF | X | √ | √ | √ | √ | √ | √ |
| TPU 85A | X | X | X | X | X | X | X |
| TPU 90A | X | √ | √ | √ | Not recommended | Not recommended | Not recommended |
| PAHT-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PET-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PA6-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PA6-GF | X | √ | √ | √ | Not recommended | √ | √ |
| PPA-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PPS-CF | X | √ | √ | √ | Not recommended | √ | √ |
| Support for ABS | X | √ | √ | √ | √ | √ | √ |
| Support for PLA/PETG | √ | √ | √ | √ | √ | √ | √ |
| Support for PA/PET | X | √ | √ | √ | √ | √ | √ |
| Support for PLA (New Version) | √ | √ | √ | √ | √ | √ | √ |
| PVA | X | √ | √ | √ | √ | √ | √ |
1. If you print only single-color filament, we recommend using the Fixed Hotend (Induction Hotend) for printing.
2. If you need multi-color printing with the AMS, connect the AMS to the right-side Fixed Hotend.
3. If you want to use the second hotend for support-material printing, we recommend using the Liftable Hotend.
4. TPU85A is only supported on the right-side Fixed Hotend. TPU95AHF/90A is expected to be supported on the left-side Liftable Hotend starting from firmware version U2.
5. PET-CF / PPA-CF / PPS-CF are supported only on the left-side Liftable Hotend.
6. CF/GF-reinforced filaments are not compatible with stainless steel nozzles.
Compatibility
H2C and H2C Laser
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Bambu Lab Induction Hotend with Hardened Steel Nozzle is specially designed for H2C Vortek System. Each Vortek Hotend stores its filament information locally, ensuring correct material mapping and preventing loading errors. When printing with more than seven filament types, the system intelligently optimizes hotend mapping to minimize purge waste and improve overall efficiency.
The Vortek Induction Hotend rapidly heats the nozzle to printing temperature in approximately 8 seconds (PLA). This fast response shortens color-change transitions and further reduces purge waste. Integrated overheat, overvoltage, short-circuit, and open-circuit protection ensure reliable performance during continuous multi-material workflows.
Real High-Flow, Real Time Saved
| H2C Max Volumetric Speed | |
| Induction Stainless Steel Nozzle (0.2mm) | 2 mm³/s |
| Induction Hardened Steel Nozzle (0.4mm) | 25 mm³/s |
| Induction Hardened Steel Nozzle (0.6mm) | 30 mm³/s |
| Induction Hardened Steel Nozzle (0.8mm) | 30 mm³/s |
| High Flow Induction Hardened Steel Nozzle (0.4mm) | 40 mm³/s |
| High Flow Induction Hardened Steel Nozzle (0.6mm) | 40 mm³/s |
| High Flow Induction Hardened Steel Nozzle (0.8mm) | 40 mm³/s |
*Tested with Bambu PLA Basic.
Filament Compatibility
| Filament | Induction 0.2 mm Stainless Steel |
Induction 0.4 mm Hardened Steel |
Induction 0.6 mm Hardened Steel |
Induction 0.8 mm Hardened Steel |
Induction 0.4 mm High Flow Hardened Steel |
Induction 0.6 mm High Flow Hardened Steel |
Induction 0.8 mm High Flow Hardened Steel |
| PLA Basic | √ | √ | √ | √ | √ | √ | √ |
| PLA Matte | √ | √ | √ | √ | √ | √ | √ |
| PLA Lite | √ | √ | √ | √ | √ | √ | √ |
| PLA Basic Gradient | √ | √ | √ | √ | √ | √ | √ |
| PLA Silk+ | √ | √ | Not recommended | Not recommended | √ | Not recommended | Not recommended |
| PLA Silk Dual Color | √ | √ | Not recommended | Not recommended | √ | Not recommended | Not recommended |
| PLA Silk | √ | √ | Not recommended | Not recommended | √ | Not recommended | Not recommended |
| PLA Metal | √ | √ | √ | √ | √ | √ | √ |
| PLA Marble | X | √ | √ | √ | √ | √ | √ |
| PLA Sparkle | X | √ | √ | √ | √ | √ | √ |
| PLA Wood | X | √ | √ | √ | √ | √ | √ |
| PLA Galaxy | Not recommended | √ | √ | √ | √ | √ | √ |
| PLA Glow | X | √ | √ | √ | √ | √ | √ |
| PLA Translucent | Not recommended | √ | √ | √ | √ | √ | √ |
| PLA tough+ | √ | √ | √ | √ | √ | √ | √ |
| PLA-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PLA Aero | X | √ | Not recommended | Not recommended | √ | Not recommended | Not recommended |
| PETG HF | √ | √ | √ | √ | √ | √ | √ |
| PETG Basic | √ | √ | √ | √ | √ | √ | √ |
| PETG Translucent | Not recommended | √ | √ | √ | √ | √ | √ |
| PETG-CF | X | √ | √ | √ | Not recommended | √ | √ |
| ABS | √ | √ | √ | √ | √ | √ | √ |
| ABS-GF | X | √ | √ | √ | √ | √ | √ |
| ASA | √ | √ | √ | √ | √ | √ | √ |
| ASA Aero | X | √ | Not recommended | Not recommended | √ | Not recommended | Not recommended |
| ASA-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PC | √ | √ | √ | √ | √ | √ | √ |
| PC FR | √ | √ | √ | √ | √ | √ | √ |
| TPU for AMS | X | √ | √ | √ | √ | √ | √ |
| TPU 95A HF | X | √ | √ | √ | √ | √ | √ |
| TPU 85A | X | X | X | X | X | X | X |
| TPU 90A | X | √ | √ | √ | Not recommended | Not recommended | Not recommended |
| PAHT-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PET-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PA6-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PA6-GF | X | √ | √ | √ | Not recommended | √ | √ |
| PPA-CF | X | √ | √ | √ | Not recommended | √ | √ |
| PPS-CF | X | √ | √ | √ | Not recommended | √ | √ |
| Support for ABS | X | √ | √ | √ | √ | √ | √ |
| Support for PLA/PETG | √ | √ | √ | √ | √ | √ | √ |
| Support for PA/PET | X | √ | √ | √ | √ | √ | √ |
| Support for PLA (New Version) | √ | √ | √ | √ | √ | √ | √ |
| PVA | X | √ | √ | √ | √ | √ | √ |
1. If you print only single-color filament, we recommend using the Fixed Hotend (Induction Hotend) for printing.
2. If you need multi-color printing with the AMS, connect the AMS to the right-side Fixed Hotend.
3. If you want to use the second hotend for support-material printing, we recommend using the Liftable Hotend.
4. TPU85A is only supported on the right-side Fixed Hotend. TPU95AHF/90A is expected to be supported on the left-side Liftable Hotend starting from firmware version U2.
5. PET-CF / PPA-CF / PPS-CF are supported only on the left-side Liftable Hotend.
6. CF/GF-reinforced filaments are not compatible with stainless steel nozzles.
Compatibility
H2C and H2C Laser
